3-in-1 Tungsten Carbide Woodworking Grinding Disc Set, 100 mm | Thrascher

This 3-in-1 tungsten carbide grinding disc set is designed for woodworking, including carving, smoothing, edge shaping, groove cutting, and ornamental work. Its three disc profiles support round, flat, and beveled processing, and the carbide tips are designed for effective material removal.

The set is intended for carpenters, DIY enthusiasts, and home improvement enthusiasts. The discs fit standard 4" and 4.5" angle grinders and install without an adapter. Use them only on wood; they are not suitable for metal, stone, or hard metals.

Features

• Three profiles for different tasks: use the round disc for carving and curved areas, the flat disc for smoothing large surfaces and fast material removal, and the beveled disc for edge shaping and angle finishing.
• Tungsten carbide tips are wear-resistant, withstand heat, and maintain their shape while removing material.
• The set supports round, flat, and beveled processing, as well as edge shaping, groove cutting, ornamental work, and surface smoothing.
• Designed for smooth operation with low vibration.

Specifications

• Material: Industrial carbide (tungsten carbide)
• Outer diameter: 100 mm
• Inner diameter: 22.5 mm
• Weight: approximately 300 g
• Compatible tool: standard 4"/4.5" angle grinders
• Color: Gold
• Packaging dimensions: 18 × 11.5 × 4 cm
• Maximum speed: 12,000 rpm
• Intended material: wood only; not suitable for metal, stone, or hard metals

Use and Handling

• Wear protective eyewear and gloves during use.
• Do not exceed 12,000 rpm.
• Clean the discs with a soft brush after each use.

Box Contents

• 1 round grinding disc for carving tasks and curved areas
• 1 flat grinding disc for large-surface smoothing and fast material removal
• 1 beveled grinding disc for edge shaping and angle finishing